Quick Comparison of HPE MSA 2070 16Gb Fibre Channel SFF Storage vs PowerVault ME5024 Storage Array at a Glance

The server comparison table provides a quick overview of the key specifications and key features for HPE MSA 2070 16Gb Fibre Channel SFF Storage and PowerVault ME5024 Storage Array Let’s take a look at the comparison table below.

Features	HPE MSA 2070 16Gb Fibre Channel SFF Storage View Check the Price	PowerVault ME5024 Storage Array View Check the Price
Form Factor	2U Rack Mount	-
Controller Type	Dual 16Gb Fibre Channel Controllers (8 Ports Total)	-
Drive Bays	24 SFF (2.5-inch) Hot-Swap Bays	24 x 2.5" bays in base unit; expandable using ME412, ME424, or ME484 enclosures.
Max Capacity	Up to 7.37 PB (with expansion)	-
Storage Expansion	Supports up to 9 MSA 2070 Disk Enclosures	-
Host Connectivity	16Gb Fibre Channel	-
Power Supply	Dual 580W Redundant PSU	Two 580W redundant hot-swap power supplies.
RAID Support	MSA-DP+, RAID 1, 5, 6, 10	Supports RAID 1, 5, 6, 10 and ADAPT (Distributed RAID) with multi-level combinations.
Data Tiering	Real-time Automated Tiering (SSD/HDD Hybrid)	-
Processor	-	Intel Xeon processors with dual active controllers.
Memory	-	16 GB per controller.
Drive Support	-	Supports SAS and NL-SAS HDDs and SSDs including FIPS-certified SEDs; hybrid configurations supported.
Max Internal Raw Capacity	-	Up to 184 TB in base configuration; expandable up to 5.22 PB with three ME484 expansion enclosures.
Network Ports	-	Supports up to 8 x 32Gb Fibre Channel, 8 x 25GbE iSCSI (BaseT or SFP+), or 8 x 12Gb SAS host interfaces, plus 2 x 1GbE management ports.
PCIe Expansion	-	Not applicable; host interfaces provided through onboard or multi-protocol cards.
USB Ports	-	Management ports available through 1Gb BASE-T interface.
eSATA Ports	-	Not applicable; expansion handled through 12Gb SAS protocol.
Cooling	-	Redundant cooling fans with approximately 1980 BTU heat dissipation.
Dimensions	-	Height 8.79 cm (3.46"), width 48.3 cm (19.01"), depth 54.78 cm (21.56"), weight up to 30 kg.
Operating Temperature	-	Designed for standard data center environments; specific range not detailed.
Software Features	-	Includes ADAPT RAID, thin provisioning, snapshots, replication, automated tiering across three levels, SSD read cache, and VMware integration.

Key Features Comparison

High-Performance Entry-Level SAN

The HPE MSA 2070 is a 2U entry-level shared storage array that delivers up to 2× more IOPS (random) and up to ~30% more sequential bandwidth compared with the previous-generation HPE MSA Gen6 storage, making it ideal for small-to-midsize SAN environments and virtualization.

16 Gb Fibre Channel Host Connectivity

Equipped with two 16 Gb Fibre Channel controllers, each with four host ports, the MSA 2070 provides 8× 16 Gb FC host ports per array for high-speed, low-latency SAN connectivity suitable for VMware, Hyper-V, and mixed-workload environments.

Flexible All-Flash / Hybrid SFF Storage

The MSA 2070 SFF variant supports 2.5-inch small form-factor drives, with configurations ranging from all-flash to hybrid setups, allowing you to mix SSDs and HDDs for performance-tiering and cost-optimized capacity.

Massive Scalable Capacity

You can scale beyond 7 PB per array by adding up to nine 2U expansion enclosures (24-drive SFF or 12-drive LFF), supporting high-capacity HDD and SSD options and providing long-term growth without forklift upgrades.

Automated Data Tiering

The array supports real-time automated tiering, using SSDs as a performance tier while automatically placing less-active data on lower-cost HDDs, helping boost effective IOPS by up to 4× versus HDD-only configurations with minimal SSD investment.

Integrated Management & Energy Efficiency

The MSA 2070 uses HPE Storage Management Utility (SMU) with an intuitive GUI that guides you through setup in minutes and supports configuration, monitoring, and reporting; the system is also ENERGY STAR compliant, helping reduce power consumption in data centers.

A PHP Error was encountered

Severity: Warning

Message: Invalid argument supplied for foreach()

Filename: views/info_comparison_results.php

Line Number: 495

Backtrace:

File: /home/infomeuae/public_html/application/views/info_comparison_results.php
Line: 495
Function: _error_handler

File: /home/infomeuae/public_html/application/controllers/Comparison.php
Line: 232
Function: view

File: /home/infomeuae/public_html/index.php
Line: 315
Function: require_once

HPE MSA 2070 16Gb Fibre Channel SFF Storage vs PowerVault ME5024 Storage Array : Which should I choose?

Choosing the right server is a critical decision for any business, and comparing HPE MSA 2070 16Gb Fibre Channel SFF Storage and PowerVault ME5024 Storage Array gives you clear insights into which solution aligns best with your IT requirements. These servers are built for high performance, but they may differ in areas such as processor capacity, memory, storage, and scalability, making a side-by-side comparison easy.

This direct comparison helps you quickly identify the strengths and limitations of each server, which helps you determine which model best supports your workloads, applications, and long-term IT goals. By evaluating them together, you can make a smarter investment that ensures reliability and efficiency for your business.

Looking for more Servers Brand wise?

Discover the full range of

Still unsure which Servers is right for you?

Contact Infome for expert guidance.

Call Our Experts WhatsApp Us